How to restore a Windows XP system from a checkpoint. Restoring Windows XP to the very beginning How to restore a Windows xp system

Greetings, dear readers of the site. I want to tell you how to do it for windows xp professional system recovery using built-in tools rstrui.exe

And for Windows Vista and Windows 7

Step 1:
Restart your computer (if that doesn’t work, press and hold power button The system will turn off. Turn on the system), press the key F8 during boot until the selection menu appears (Step 2).

If you need to select an operating system, use the arrow keys to select the operating system you want for your computer and press ENTER.

Step 2:
Use the arrow keys to select safe mode with command line support

Step 3:

Log in as an administrator or with another account that has administrative rights.

Step 4:
At the command prompt, enter the command rstrui or c:\WINDOWS\system32\Restore\rstrui.exe and press ENTER.

Step 5:
To restore your computer, select Restoring your computer to an earlier state.



Step 6:

To restore the system, you must select test restore point . If the blocking occurred on February 21, 2012, then for a guaranteed recovery, select the previous recovery point 20, for example. When you click on it, information is displayed about what changes were made on that day. After selection presses Further


Step 7:


There is no need to do anything while the recovery is running; the operating system will reboot itself after the recovery.


Now your computer is in the same state as it was on the recovery checkpoint date.


Tested PERSONALLY on Windows XP Professional, The procedure is similar for operating systems W7 Windows 7 Windows Vista read

Recovery checkpoints ROCK!!! Never turn off Windows Recovery.This is such a lifesaver at the right time.

A little humor: How "Inexperienced users" of Microsoft Windows search in search engines- Windows,Windows,Windows orWindows

If you need inverters for solar panels, then you can purchase them at a good price on one-sun.ru. You will receive electricity without overpaying and preserving the environment.

The old Windows XP is so popular among many users because of its reliability, but even it crashes sometimes. Most often, of course, this happens due to the crookedness of users, but there are other reasons. Be that as it may, the best way to get your computer back to working is to restore the Windows XP system, that is, roll back the recently made changes.

Often, restoring the Windows XP system can solve the problem (if it is not physical in nature). And in this article I will tell you what needs to be done for this.

How to restore Windows XP system

Before you restored your Windows XP system, you most likely discovered that it wouldn't boot at all and went into a hysterical panic. Instead of panic, you need to download to .

When the system turns on in safe mode, you need to click “Start”, then select “All Programs”, in it the “Accessories” section, then “System Tools” and finally click on “System Restore”.

In the program that opens, check the first item “Restore the computer to an earlier state” and click “Next”.

Afterwards you will see a calendar where dates to which you can roll back will be marked in bold numbers. Having selected the one you need, click the “Next” button, and then “Next” again. The Windows XP rollback will begin, the computer will reboot, recover and boot into normal mode, and you will receive a success message.

Restoring a Windows XP system takes some time, and the more time there is between the rollback date and today, the longer it will take. During recovery, it may seem like nothing is happening. In fact, this is not true. You just need to be patient and wait for the operation to complete.

Since you need to restore your Windows XP system from a checkpoint, it is necessary that they be created automatically. To do this, you must enable this feature. You can check whether it is enabled as follows: on “My Computer”, right-click and click “Properties”, and go to the “System Restore” tab. There should be no checkmark next to “Disable system recovery on all disks”. You also need to look carefully at the table below with a list of hard drives. The “Status” column on all disks should say “Monitoring”.

Restore checkpoints on Window XP are created automatically when installing some programs, drivers, or by the system itself for no reason. You can also do it manually. Before you do something incomprehensible on your computer, it is recommended to create a restore point so that if something happens, you can roll back the changes.

We can look at the second option using a simple example: editing the BOOT.INI file from the recovery console. The Master Boot Record is the first sector of the boot partition on the hard drive. The sector contains a partition table and a program tasked with loading the operating system. If the master boot record is damaged or missing, you and I will never boot the operating system. And sometimes this damage or absence still occurs at the most inopportune moment.

For example, one user decided to install 20 operating systems on his computer, and set about creating the corresponding partitions on his hard drive (and sometimes they even create them), and then installing them accordingly. Naturally, all this stops loading at some point and we need to get out of the situation with dignity.

Restoring Windows XP via the console

We insert the Windows XP installation disk into the drive and reboot, in the BIOS we set the disk drive as the first boot device, if you don’t know how, read with us. Next, the Windows XP installation program is loaded and after loading a menu appears, in it you need to select item No. 2. To restore Windows XP using the Recovery Console, click R.

Click R and enter the Recovery Console, by the way you can read

We have one operating system installed on the disk WITH and when asked which copy of Windows should you log in to, enter the number 1 and press Enter.

If you did not have an administrator password, simply press Enter; if you did, enter a password.

A message will appear:



That's all Restoring Windows XP via the console should complete successfully, enter exit and reboot.

What may not work for us, when entering the FIXMBR command, an error message appears, this means that writing to the partition table (MBR) is blocked by settings in the BIOS, you need to go into the BIOS and find the Boot Virus Detection parameter there (the Enabled value) this option blocks overwriting the boot sector of the hard drive, which is what happens in our case.

Next, the following error may occur: “Windows cannot start due to hardware disk configuration errors”, in this case the BOOT.INI file is to blame, to fix it, boot into the recovery console again and enter the command bootcfg /rebuild and press ENTER

  • You can catch a virus.
  • You can render the operating system inoperable by installing a large number of programs.
  • You may simply experience a critical crash, after which Windows will refuse to function normally.

The result in all these situations will be the same: you will need to restore Windows XP. Of course, you can reinstall the operating system, but this is a long process. It is much easier to use standard Windows tools, which do the required manipulations automatically. In this case, we are talking about the rstrui.exe application or downloading the installation disk.

Action diagram from download

You can bring Windows XP back to life from the boot menu. Naturally, you need to go into it first.

  • So, you should restart your computer. If Windows is so out of order that even the restart button cannot be found, then you just need to press the power button on the computer itself for a long time. When starting the download, you will need to hold down the F8 key.
  • A special menu will appear in which you can select a specific operating mode. Here you should use safe mode.
  • Next, log in to the system as an administrator.
  • Open the command line, usually it is presented in the Start menu under the name CMD. Type rstrui or the address c:\WINDOWS\system32\Restore\rstrui.exe into the command line and press the Enter key.
  • A very useful tool will launch, in which you should select Restore your computer to an earlier state.

  • Once the feature is installed, you will need to click on the Next button.
  • A list of recovery points will appear in the menu that opens. These are pictures of the system that it takes on its own. A snapshot is drivers and programs in their working settings and versions. You need to select a point that was saved before a serious computer failure occurred. After that, click Next.

  • The next step is to confirm the selection of the recovery point by clicking Next.

  • We wait for the procedure to complete, after which we receive a window with the result.

Recovery Console

It is also possible to return the system to a working state through the recovery console. To do this you need:

  • Insert the boot disk into the computer's drive and restart it.
  • Select boot from DVD priority in BIOS.
  • On the Windows XP installation screen, click the start installation button.
  • Press the R key on your keyboard to launch System Restore.

A tool like this may require a user password. It must be entered for the processes of returning to normal to start. This method is very convenient, as it helps bring the operating system back to life even if it does not start at all. Naturally, you will need a Windows XP boot disk. It can be downloaded on the Internet in an installation image and burned to disk using a special program. In this case, UltraISO is suitable. The procedure is as follows:

  • Download the program from the Internet.
  • We install it on the computer.
  • Download the Windows XP installation image from the Internet.
  • Open the UltraISO program and select this virtual image.
  • Click on the Burn CD image button.

  • Set the speed as shown on the slide. Place the bird next to the DVD disc.

We are waiting for the recording to finish. After this, the boot disk is ready and can be used to download the Windows XP installation program.

Prevention

Restoring a Windows XP system is a typical situation for computer users. So don't panic if your operating system starts behaving abnormally. It is enough to use the resources of Windows itself. The point is that software snapshots are taken regularly. The user can also carry out such manipulations independently. Under no circumstances should you turn off the systems that are responsible for this process.

And you can prevent Windows malfunctions. . The fact is that the computer is often loaded with unnecessary programs and graphic effects. If you carry out regular cleaning on this issue, you can easily avoid typical troubles. You should also avoid suspicious sites on the Internet where everything is offered for free. Typically, you can only get malicious software for free. Vigilance and order in the computer will make work comfortable and fast.

(Visited 5,611 times, 2 visits today)

23.05.2015

When working in Windows XP, problems arise that can lead to lost work time. You can restore functionality using System Restore.

Microsoft operating systems are especially susceptible to viruses. In addition, there are many other reasons that can cause a failure. When the boot area is damaged or system files become infected, users often resort to reinstalling Windows.

When it is not possible to start safe mode, and errors occur when starting the operating system, the first thing you need to think about is restoring the system. This feature allows you to return to a saved copy of system files, thereby giving new life to Windows without resorting to a complete reinstallation.

Why is it better to use Windows XP recovery than reinstallation?

Most IT professionals prefer reinstalling Windows XP over repair. They argue that in this way the system will be updated, will stop producing errors, and the problems will disappear by themselves. This is true.

However, restoration has no less effect, in addition, it has advantages:

  1. Takes much less time;
  2. Does not require backup of all information stored on the system drive (it is worth moving files from folders such as “My Documents”, “Desktop”, pages saved in “Favorites”);
  3. There is no need to search and install drivers;
  4. No need to reinstall the software;
  5. Software settings, network equipment and user system parameters do not need to be re-entered.

All of these benefits of recovery over installation are possible if you create recovery points correctly and periodically.

What are Windows XP restore points and how to work with them

In order to use Windows XP recovery, the following conditions must be met:

  1. Enable the appropriate service;
  2. Create a point that is relevant to you;
  3. The program responsible for the recovery process must be running. It is located in the folder C:\WINDOWS\system32\Restore\rstrui.exe

You can simply check whether the recovery service is running by launching the application from Utilities.

A point represents a backup of important data for a certain period of time. As a rule, it is created automatically when changes are made to system settings. You can also create a restore point yourself. It is recommended to do this before installing updated drivers or questionable software.

To create a manual backup, you must follow these steps:

  1. Open the Start menu and go to standard programs;
  2. Find the “System Tools” item and run System Restore;
  3. Select "Create a restore point".

Creation may take from 5 to 30 minutes depending on how busy Windows is. It is recommended to create a point manually immediately after reinstalling the operating system, installing the necessary drivers and programs on it, and also entering network settings.

Methods to start Windows XP recovery

Since the process of returning to a previous system state is often a mission-critical operation, there are several ways to initiate it.

Method 1. Recovery using a point


You can start Windows XP recovery from a point by using safe mode, if it is possible to start it. This is done using the “F8” key while loading the operating system.

The program will prompt you to select one of the calendar dates when automatic or manual backup was launched to a special folder. It is necessary to choose the most stable version when Windows XP has not yet been damaged or infected with viruses.


The disadvantages of this method of rolling back to a backup are the following:

  • Safe mode may not start at all;
  • Point files may be infected or damaged by viruses;
  • Unlike later versions, rollback from points is not possible when using the boot menu or running from disk;
  • Some files are not replaced, but copies are created;
  • Monitoring the system partition takes up RAM.

Method 2. Rollback using distribution kit

If you have a Windows XP installation distribution at home, recorded on a disk or flash drive, or the automatic backup service has been disabled, you can always use it to restore the system. Depending on the current situation, you can start the process in two ways:

  • If the operating system boots normally. In this case, you need to insert the installation disc and wait for the menu to load. In it you need to select “Install…” and click “Next”.

In the next window, instead of installation, select “Update” from the drop-down menu.


  • If Windows XP does not boot at all, then the last resort using disk recovery is to start from the boot area. To do this, you need to select the desired device with the distribution in Bios in boot priorities and start from it. During the installation process, you will be presented with an option selection menu, where you will need to press the “R” button, which starts system recovery.

After the distribution detects the system partition and finds the installed copy, it will offer a choice. You need to highlight it and confirm the action again with the “R” button.


  • When restoring the system from the distribution, driver files that are system may be replaced, which can lead to new hardware conflicts;
  • To launch a rollback, it is advisable to use the installation disk from which the installation was performed;
  • An official or at least not truncated distribution is required, as in most assemblies to save space for drivers, otherwise the rollback function may be disabled there.

Do not forget that the recovery function does not guarantee 100% system functionality at the end of the operation and will not return lost data. If your personal files have been damaged, use a specialized program.

Result:

Despite the fact that, unlike modern versions in Windows XP, the recovery system is far from ideal, you should not disable it. In the seventh and eighth versions of Windows, the use of a backup point for rollback is more thoughtful. Most of the errors and problems of this process have been fixed there. In addition, the main distinguishing feature is the ability to create a copy of an entire partition (image) for subsequent recovery and work with a point from the bootloader.

Each method has its own disadvantages, and a backup copy may not always be a salvation. However, in most cases, this option allows you to quickly restore functionality to your personal computer. And then you can begin the necessary operations to treat viruses or search for deleted information.

Did you like the article? Share it
Print this article
Top