How to wash a mouse. Everything for X7 users. When to clean your mouse

For many not-so-experienced users, it may be big news that among the dirtiest items in their home are the seemingly clean computer mouse and working keyboard. What is strange about this if we have all been taught hygiene before eating, but the rules of hand hygiene before starting to work with a computer have somehow not yet been established.

How to clean?

A computer mouse is cleaned according to approximately the same principle as a working keyboard. Firstly, you need to disassemble it very carefully. Secondly, there should be no abuse of water. Thirdly, all cleaning operations should be carried out only when it is disconnected: we do not need contact with current, and if you disassemble and clean it while connected, you risk doing something wrong with open programs. So it’s better to turn off the computer, and then disconnect and disassemble your favorite “mouse”.

If you comply with all these conditions, you will not need to throw away the device that has become familiar at the slightest problem, since any computer mouse allows for self-cleaning: you will definitely always have time to buy a new one. And it is possible that all failures in its operation are simply due to accumulated dirt inside and outside.

If you work with a regular mechanical mouse, after a while you will notice that its cursor has stopped obeying you. The fact is that over time, dust and grease adhere to the ball that is in contact with the surface. In addition, any device needs to be cleaned from time to time. To do this, it is better to simply wipe it with a lightly soapy cloth, but under no circumstances should it be washed under running water. Rubbing with alcohol works very well - this way you will get rid of dirt and grease deposits, and also disinfect the device. By the way, this will not be superfluous if one of the users of your home computer is sick or has just been sick.

If you have an optical-type wireless computer mouse, you do not need to clean it as often as a ballpoint mouse. However, external cleaning is still necessary. If, after turning the “mouse” upside down with the lens, you see that the optics are dirty, carefully clean it with a regular cotton swab. It can also be soaked in alcohol.

But you need to learn how to disassemble a mechanical mouse.

Turn the device over and find the small screw at the bottom. This is the connection between the upper and lower parts of the device body. To unscrew it, you need to find a suitable small Phillips screwdriver. After this, very carefully separate one part of the mouse from the other.

The ball needs to be rinsed well or wiped clean from anything that has gotten stuck on it. Next you need to clean all the internal parts of the device that are in direct contact with the ball. And it won’t hurt to wipe the entire surface from the inside so that you can comfortably visit your favorite sites.

Dirt usually sticks to the cylindrical wheels, which are located perpendicular to the ball. Everything needs to be carefully cleaned off of them; some kind of plastic or plastic scraper will do for this. There is no need to take metal objects for this: they can damage the surface of the parts. Any type of solvent is not suitable for this type of work.

In the same way as the cylindrical wheels, the pressing element that holds the ball, holding it on the surface of the mat, is also cleaned.

After cleaning all the parts, reassemble the mouse and check whether it works as before without failure. If cleaning does not help, it can be shown to computer equipment repair specialists, who will evaluate whether it is operational at all - the cost of such diagnostics is low. If the device is hopelessly damaged, you will have to buy a new one.

Today, personal computers and laptops have become an integral part of our lives. This equipment requires regular maintenance. In this regard, the question often arises of how to clean a mouse. It is this device that is in constant contact with the skin of your hands and the surface of the table, so it gets dirty quite quickly. In some cases, it is better to contact a specialist, but you can clean your computer mouse from dirt and dust at home.

To clean a computer mouse yourself, you will need some tools and special products for caring for computer equipment. Before starting the procedure, you need to prepare the following things:

You can collect everything you need in parts, or you can purchase a special kit for cleaning office equipment at computer stores. In the future, such a set may be useful for other plastic surfaces. It is not recommended to use for processing:

1. Ordinary wet hand wipes - their chemical composition may not be suitable for these purposes.
2. Sharp metal objects or chemical solvents.
3. Cotton wool for cleaning from the inside. This material leaves behind many microscopic fibers that will collect dust and further contribute to contamination.

How to clean the outside of the case

There are several ways to clean a computer mouse. It can be washed only from the top or disassembled and removed dirt and dust from the mechanism.

If the device is not too dirty, it is enough to rinse it from above with a special liquid for plastic. This way you can wash the body from grease and dirt and improve gliding on the table. Processing is carried out as follows:

It is very important not to exert strong mechanical pressure on the plastic and change cotton pads and toothpicks more often.

Processing the device from the inside

It happens that external cleaning of the device is not enough. If the mouse has lost sensitivity and is not working well, it may be time to clean it from the inside. The sequence of processing steps is the same for all types:

After cleaning, all spare parts are assembled into place, the housing is closed using a screwdriver.

Cleaning different models

There are several different models of manipulator. The processing of each of them has its own distinctive features.

Mouse with a ball

The ball mouse is one of the simplest models, which has been used less and less lately. The processing procedure for such a device follows the following algorithm:

Optical variety

An optical mouse can become dirty over time, which negatively affects the quality of its operation. You can wash the device only from the top or by disassembling the case.

If the device is dirty mainly from the outside, it is enough to wipe the outer part of the housing. You can clean the top of the mouse as follows:

Now you can connect the device to your computer. It is advisable to carry out such cleaning approximately once a month. If children have access to the mouse or the user has a habit of eating in front of a computer monitor, cleaning may be required more often.

If the manipulator is under warranty, it is not recommended to open the back cover. However, if it starts to freeze, it most likely needs cleaning inside the mechanism. The step-by-step algorithm looks like this:

Now the device can be connected to the computer and used.

Laser device

Laser mice are cleaned in a similar way. The device body is disassembled and the microcircuit is removed. The laser sensor is carefully wiped with a cotton swab. Remaining dust and dirt are removed with a damp cloth, after which the inside is degreased.

Trackball and induction mouse

These types of devices are distinguished by their complexity of design. Therefore, it is recommended that only specialists disassemble them. The user can clean the mouse from dirt from the outside. To do this, just wipe the body with a cotton pad soaked in alcohol or a special cloth for plastic surfaces. For an induction mouse, it is recommended to first disconnect the manipulator.

Once a year, it is advisable to give such a mouse to a technician to check and clean the internal contents.

When cleaning any model, it is important to remember one general rule: do not allow excess moisture to enter the mechanism. This may damage the mouse.

Personal computers have long been unimaginable without a keyboard and mouse, which are the main intermediaries in the “communication” between the user and technology. Unfortunately, mice break and start acting up quite often. The computer mouse can be disassembled and cleaned.

Instructions

Dirt and dust penetrate best into ball mice, falling under the roller. The cursor begins to twitch when moving, or may not move at all in any direction. Therefore, it is very important to use a mat and ensure that dust does not accumulate on it.

Disconnect the manipulator from the PC, but only when the system unit is turned off. The mouse body can be cleaned with a regular damp cloth and a small amount of liquid soap. But don’t even think about washing your mouse under running water. True, after disassembling the optical (namely optical) mouse, the case itself can be thoroughly rinsed. It’s just that mechanical mice also have a microcircuit that cannot always be removed from the case.

Take a small Phillips screwdriver and unscrew the small screw that is located in the recess at the bottom of the manipulator body. Typically the body consists of two parts. There may also be a small latch on the side of the screw. Gently separate the body without using much force.

If the mouse is optical, you need to carefully wipe the glowing red “eye” in its lower part using a match with cotton wool or an ear stick. You can also use a can of compressed air. Carefully remove the large chip from the optical mouse body and free its plastic parts from dust, dirt and hair (fur). Remove the rubber-covered ball from a ball mouse and wash it with soap or wipe with alcohol. Pay special attention to the mouse wheel and its mountings. Dirt often accumulates there too.

To mechanically remove dirt, it is better not to use a knife or razor, but to take a small plastic scraper. Use it to thoroughly scrape off dirt wherever possible.

Having dealt with dust and adhered dirt, remove grease from the rotating parts of the manipulator. This can be done with a soft, lint-free cloth soaked in alcohol. Also wipe the insides of the mouse with alcohol to prevent dust from accumulating for longer.

Now you can assemble the mouse. Put the chip (wheel) back and close the case. Be careful not to pinch the wire. Tighten the screw and consider the mouse cleaned.

Tip added on July 7, 2011 Tip 2: How to clean a mouse When cleaning a mouse, it is important to know that the internal mechanism of both the optical and laser models is a fragile and complex mechanism that must be interacted with carefully and step by step. By following a few simple steps, you can thoroughly clean the mouse from grease and dust without damaging the mechanism itself.

You will need

• brush, vacuum cleaner, screwdriver.

Instructions

Clean the USB cable of the mouse. If the reason for carrying out these procedures was the computer ignoring the device, then it is quite possible that either the USB input on the mouse or computer is simply clogged. Bring the hose from the vacuum cleaner to the adapter or computer panel, and using a brush, carefully sweep away any accumulated dust in the adapter. If you don’t want to connect a vacuum cleaner to this procedure, you can blow out the mechanism yourself.

Unscrew the fasteners from the back of the mouse. If some buttons on your mouse are stuck or do not respond, then the problem is most likely in the mouse itself. Therefore, the first thing you need to do is dismantle the case and clean the “insides”. Be careful with the screws and bolts you remove from the mouse. They often get lost; it is best to put them away before the procedures in a small bag or simply away from the cleaning site.

Use cotton swabs to clean the mouse cavity. The main epicenters of dirt accumulation will be visible to you immediately as soon as you take it apart. These are layers between the buttons, flaps and small cracks in the case, which have accumulated dirt all this time.

If necessary, use a soldering iron. If one or another contact has come off due to a strong blow or for other reasons, you just need to return it to its place. A soldering machine is perfect for these needs, however, if you don’t have one, it’s not worth spending money on it. In most cases, it will be cheaper to buy a new mouse.

Useful advice Do not sit down at your PC without making sure your hands are clean. This will not only provide comfort when working, but will also allow your equipment to live much longer. Be careful when cleaning your laser mouse. The design of the laser in it is usually fragile, and the slightest pressure can damage its functionality. Optical and older models are less demanding on the cleaning process. How to clean a mouse - printable version

Sooner or later, any computer user is faced with the question of how to clean the mouse from dirt.

A device for controlling a computer (manipulator) is usually called a mouse because of its external resemblance to this animal. This device is always in direct contact with the user, which means it requires periodic cleaning for hygienic purposes. Many people don't think about it. But in vain. If the device is dirty, not only is it unhygienic, it will perform significantly worse, leaving you irritated about it. In addition, according to research, the dirtiest place on a desk where there is a computer is the mouse.

Before cleaning, you need to know what kind of device you are dealing with.

Mice are:

• optical (laser);
• ball.

Currently, the vast majority of users use laser devices. Ball-type ones are gradually losing their position, giving way to a more convenient type.

When cleaning your computer and its parts, you can use special tools and products sold in stores. These are various napkins, sticks, liquids, balls. Many of these devices allow you to clean the mouse without disassembling it, but they are quite expensive. Their use is advisable in cases where it is necessary to clean a large number of devices in the office, classroom, etc.

To use the products effectively, you must strictly follow the instructions on the packaging. At home, you can do without such helpers.

Remember that it is not recommended to clean the manipulator using ordinary detergents - it may be damaged. To clean the mouse, do not use various solvents, knives, or metal brushes.

You can clean the mouse from dust without disassembling it.

To do this, do the following:

1. Disconnect the mouse from the computer. If the manipulator is connected via USB, then this can be skipped.
2. There is a special lens on the back of the mouse. Very carefully clean the entire surface, the lens itself, and the area around it with a cotton swab.
3. On the same side there are plastic convex legs. It is convenient to clean them from dirt using a wooden toothpick. After completing this procedure, the mouse will move across the surface much better.
4. Use a toothpick to clean all hard-to-reach places and on the front side of the device.
5. Wipe the surface with a napkin or soft cloth. It may be slightly damp, but under no circumstances wet.

The use of any abrasive cleaning agent is prohibited.

It is necessary to clean the mouse from dirt in this way every month.

You can carefully monitor your work area, wipe the keyboard and mousepad, but this will not prevent dirt and dust from getting inside the mouse, so at least once every three months you need to clean the device more thoroughly.

To do this, you will have to disassemble the thing and clean it as follows:

1. Use a Phillips screwdriver to remove the screws (they can be easily seen on the back of the device). Naturally, small parts should be placed in a small container so that they do not get lost.
2. Remove the mouse body.
3. We clean all parts from dirt. There is no need to use sharp objects when cleaning - they can damage the parts of the manipulator. Clean with a cotton swab. If the wheel needs cleaning, do it with a cotton pad.
4. Wipe all surfaces and parts with a swab treated with alcohol - this will degrease the surfaces and promote better cleaning. In addition, this procedure will protect the item from exposure to dust for a long time.
5. Assemble the manipulator. If you pulled out the microcircuit for processing, put it back in place. Close the lid and tighten the screws.

Don’t forget to wipe the computer mouse itself and the cord, if any, with alcohol at the end. Be sure to treat the mouse pad.

Both of these methods are applicable for any type of device.

If this procedure is performed periodically and carefully, then the mouse itself will work well without causing you any trouble.

« How to clean a mouse?“- we ask ourselves this question when it comes time to remove dirt from a personal computer component. This device has become an integral part of human life. Computers are found in almost every home, workplace, company, especially in offices, thereby making work easier. But in order for equipment to serve for a long time, you need to take care of all its parts. And while the keyboard is at least occasionally wiped down, the mouse is often left unattended. In fact, this wireless or wired “assistant” also needs care and cleaning from dirt. Dust and grease accumulate on a person’s hands, hence the dirt on the mouse. In our article and video, we will tell you how to clean a computer mouse at home, disassembling or without disassembling the device, and what tools will help you achieve the desired result.

Wireless and wired mouse

Wireless and wired mouse. In order for the device to function well, its operation is correct and no breakdown occurs, you need to adhere to preventive measures and always monitor the cleanliness of the workplace.

There are six types of mice, which differ in how they clean dirt and dust.

Mouse type
Gyroscopic	The design of this type of mouse is quite complex, so you should not disassemble it yourself. An alcohol solution is suitable for cleaning: simply wipe the surface of the device with a cloth or cotton pad soaked in liquid. We advise you to take your mouse to a service center for comprehensive cleaning at least once a year.
Induction	Before you start cleaning the mouse itself, you need to remove the manipulator from it. After using cotton swabs, pre-moisten them with an alcohol solution. Next, move on to processing the surface of the device.
Laser	“Difficulties” arise with this computer mouse due to the fact that it is not known how to clean the mouse laser itself from dust. Doing this is not as difficult as it might seem at first glance. After you disassemble the case and remove the chip, you need to remove dust from the sensor with a thin object with a soft end, for example, a cotton swab. Remove any remaining dirt with a damp cloth and assemble the laser mouse together.
Mechanical (ball)	The use of a mechanical mouse from a computer has become a thing of the past, however, even in our world that keeps up with the times, there are people who prefer to use this particular type of mouse. Basically, dust accumulates near the roller or ball itself. To clean the mouse wheel, you first need to disassemble its body. Using a scraper, treat the component of the personal computer, and then wipe it with a cotton pad or cloth, after moistening it in an alcohol solution. To prevent problems with dirt and dust in your mouse from frequently bothering you, wipe your hands with antiseptic agents before use, clean the mouse pad regularly, and keep your work area tidy.
Optical	The first step is to process the mouse legs, which are located on the bottom panel of the device. This should be done with cotton swabs soaked in alcohol. Using the same sticks, you need to remove dust and dirt from all narrow holes, crevices, and wipe the surface of the device. Complete the treatment by wiping with damp cloths and drying.
	The design of a trackball, like a gyroscopic mouse, will not be easy to figure out on your own, so for the first time you will not be able to do it yourself. An alcohol solution will clean the surface of the mouse from dust, fat and salt deposits.

Cleaning the mouse involves using cotton swabs (it’s better to stock up on different sizes to clean even in hard-to-reach places), discs and swabs, mats for parts, special cleaning liquids, antibacterial wet wipes, a Phillips screwdriver for disassembling the mouse, a plastic scraper, soap solution and soft rags

Methods for cleaning the device

There are several methods for cleaning the device. You can clean a wireless or wired computer mouse from dirt by disassembling it or without disassembling it.

We'll start with, perhaps, a simpler method - without disassembling the accessory. So, to remove dirt deposits of dust, salt and grease without disassembling the mouse, you need to:

• disconnect it from the power supply by pulling it out of the computer connector;
• If you are cleaning a wireless mouse, remove the sensor;
• Use a cotton swab moistened with an alcohol solution to clean the wire and the “entry” hole of the mouse;
• then use a computer vacuum cleaner, setting the minimum power, to remove dust through the accessible holes;
• then remove dirt from the gaps between the buttons, remove the wheel using toothpicks and matches with a sharp end;
• and finally, you should wipe the entire surface of the mouse with a damp cloth or cloth, moistening it in an alcohol solution.

A more labor-intensive process is cleaning a computer mouse by disassembling its housing. You need to follow this sequence of actions:

• disconnect the mouse wire or stop the wireless device by turning off the sensor;
• start treating the socket and wire with alcohol-soaked cotton swabs;
• Unscrew the screw using a Phillips screwdriver, preparing a mat for storing parts in advance;
• after unscrewing the screw, the body will easily separate into two parts;
• Carefully remove all parts from the upper part, placing them on the mat;
• use a scraper to remove dirt from the internal components of the mouse;
• Apply alcohol to a soft cloth and remove any remaining dirt;
• dry all parts;
• assemble the device.

Cleaning the mouse by disassembling its body will give you the opportunity to carefully go through all the details and eliminate all contamination as much as possible.

Your X7, Bloody, Logitech, Lenovo or other brand mouse is clean and ready to use.

Now you know how to clean your computer mouse from dirt, dust, grease and salts. Taking into account our recommendations, you will not have any problems with cleaning your wired and wireless accessories.